CGS is recognized within the gas industry for providing a comprehensive range of low cost, high reliability gas detection for many applications. We have installed and commissioned natural gas,carbon monoxide & LPG sensors in applications such as boiler rooms, kitchens, car parks, aircraft hangers, factories and shopping centers.
Carbon monoxide has specific gravity of 0.97 and is therefore slightly lighter than air. However for positioning purposes, at the concentrations of carbon monoxide relating to the detector alarm thresholds, the resultant combination of carbon monoxide and air will neither rise or fall. The best position to mount the CO sensor is 62 inches above ground level. For car parks, 62 inches above ground level is still recommended. When the sensor head detects carbon monoxide at a level exceeding 50ppm for over 4 minutes the attached system will trigger into the alarm state. This is re-settable by rectifying any gas leak, allowing the sensor head to clear and restarting the Merlin panel.For further information on our Merlin gas detectors please refer to our product data sheet.
CGS is recognized within the gas industry for providing a comprehensive range of low cost, high reliability gas detection for many applications. Below are the models available for the XS range of detectors:
- Natural Gas (Methane)
- Carbon Monoxide
For any other gas monitors not listed above, please refer to the TFT range of CGS gas detectors.
• Low level & high level alarm.
• Straightforward to install .
• Covered by Canadian Gas Safety 3 year warranty.
• Width – 5.2 inch
• Depth – 1.3 inch