Detector-X Final - 600x470

Merlin CO2 TFT Gas Detector

CO2 (Carbon Dioxide)

Product Description

The TFT range of CGS detectors work in combination with the CGS Merlin range of Gas Detection panels and Utility Controllers. NDIR sensor for industrial and commercial indoor applications. Compact, modern, digital design makes the units aesthetically pleasing and easy to install.

Carbon dioxide is slightly lighter than air. However for positioning purposes, at the concentrations of carbon dioxide relating to the detector alarm thresholds, the resultant combination of carbon dioxide and air will neither rise or fall. The best position to mount the CO2 sensor is 5ft 6″ inches above ground level. When the sensor head detects carbon dioxide at a level exceeding 4500ppm for the attached system will trigger into the alarm state. This is re-settable by rectifying any gas leak, allowing the sensor head to clear and restarting the Merlin panel.

For further information on our Merlin gas detectors please refer to our product data sheet.

CGS is recognized within the gas industry for providing a comprehensive range of low cost, high reliability gas detection for many applications. Below is our most popular gas detectors:

  • Natural Gas (Methane)
  • LPG
  • Carbon Monoxide
  • Oxygen
  • Refrigerants
  • Nitrogen Oxides

For any other gas monitors not listed above, please contact Canadian Gas Safety or your local representative for further information.

• Low level & high level alarm.
• Traffic light style gas level display indicator.
• Straightforward to install.
• Modbus RTU compatible
• Covered by Canadian Gas Safety 3 year warranty.

• Height – 5.51 inch
• Width – 3.74 inch
• Depth – 1.18 inch