Detector-X Final - 600x470

Merlin CO TFT Gas Detector

Carbon Monoxide

Product Description

The TFT range of CGS detectors work in combination with the CGS Merlin range of Gas Detection panels and Utility Controllers. Semi conductor type sensor for industrial and commercial indoor applications. Compact, modern, digital design makes the units aesthetically pleasing and easy to install.

Carbon monoxide has specific gravity of 0.97 and is therefore slightly lighter than air. However for positioning purposes, at the concentrations of carbon monoxide relating to the detector alarm thresholds, the resultant combination of carbon monoxide and air will neither rise or fall. The best position to mount the CO sensor is 62 inches above ground level. For car parks, 62 inches above ground level is still recommended. When the sensor head detects carbon monoxide at a level exceeding 50ppm for over 4 minutes the attached system will trigger into the alarm state. This is re-settable by rectifying any gas leak, allowing the sensor head to clear and restarting the Merlin panel.

For further information on our Merlin gas detectors please refer to our product data sheet.

CGS is recognized within the gas industry for providing a comprehensive range of low cost, high reliability gas detection for many applications. Below is our most popular gas detectors:

  • Natural Gas (Methane)
  • LPG
  • Carbon Monoxide
  • Oxygen
  • Refrigerants
  • Nitrogen Oxides

For any other gas monitors not listed above, please contact Canadian Gas Safety or your local representative for further information.

• Low level & high level alarm.
• Traffic light style gas level display indicator.
• Straightforward to install.
• Modbus RTU compatible
• Covered by Canadian Gas Safety 3 year warranty.

• Height – 5.51 inch
• Width – 3.74 inch
• Depth – 1.18 inch